Double-layer glass electric vacuum reactor
Contact Info
- No.4285 Shendu Highway, Pujiang Town, 200000
- 胡工
- 18001633556
- 15000845544@163.com
Double-Layer Glass Electric Vacuum Reactor
Product Introduction:
Double-Layer Glass Electric Vacuum Reactor is equipped with an electric constant-speed stirring system, condensation system, and dropping system. The interlayer of the reactor body needs to be connected to an external heating or cooling circulation device. While stirring the materials, circulating hot solution or coolant is injected through the interlayer to heat or cool the materials in the reactor at a constant temperature. When the materials are heated and reacted, the evaporation efficiency can be improved under vacuum conditions (a vacuum device needs to be connected). The solvent vapor is cooled into liquid when passing through the glass condensation coil (a cooling device needs to be connected), which can flow back into the reactor or be recovered through the valve at the lower part of the return elbow. After the reaction is completed, the materials can be discharged from the side outlet at the bottom of the reactor.
This series of products need to be matched with a vacuum device, high-temperature or low-temperature circulation device, etc. to form a complete system device.
Technical Parameters:
Product Name: 20L Three-Layer Jacketed Stainless Steel/Glass Reactor
Material of Inner Reactor Body: 316L Stainless Steel
Material of Non-wetted Reactor Body: 304
Material of Reactor Lid: 316L
Reactor Design: Sealed reactor capable of withstanding vacuum and positive pressure
Wall Thickness of Inner Reactor Jacketed Layer: 5mm
Inner Jacketed Layer of Reactor: Capable of using water bath or oil bath
Outer Jacketed Layer of Reactor: Insulation layer
Jacketed Layer Inlet/Outlet: DN25 quick-connect joint
Designed Total Volume: 26L
Effective Volume: 20L
Reactor Body Structure: Upper and lower head structure
Reactor Lid Openings: Vacuum pressure gauge, sight glass with scraper, feed port with filter, feeding hopper, vacuum breaking respirator, spray ball, sight glass (with internal lighting)
Inner Reactor Structure: Frame-type wall-scraping stirring, stirring power 400W, rotation speed 0-63r/min, scraper made of integral PTFE Class A scraper, speed regulated by Taiwan Delta frequency converter;
Reactor Lid Connection Method: Surrounding locking buckles
Reactor Bottom Structure: Bottom-mounted disperser
Homogenizer: Bottom-mounted, power: 2.2KW, rotation speed: 0-3600r/min, bimetallic water-circulating mechanical seal
Temperature Measuring Component: PT100 temperature probe
Discharge Method: Tipping discharge
Reactor Lid Lifting Method: Electric hydraulic lifting
Lifter Material: 304
Lifting Column Material: 304
Product Features:
Highly modular equipment design, various systems can be optionally installed
High-speed motor with long-life design, stable operation
Reasonable overall structure design, high-quality materials selected
Stepless speed regulation, with a shear linear speed of 27m/s
Suitable for different working environments (sealed, open, atmospheric pressure, vacuum)
Overload protection and double insulation provide safety assurance
Working head made of stainless steel, reusable, meets GMP hygiene standards
Modular equipment design, any system can be flexibly combined. Custom functions you need can be added arbitrarily.
Product Parameters:
Model: | YK-20L |
Power Supply: | 220V/50/60Hz |
Stirring Volume: | 8~20L |
Processing Volume: | 10~20L |
Working Temperature: | 120°C (high temperature optional) |
Heating Method: | Water bath (or oil bath) circulation |
Vacuum Level: | -0.096Mpa (positive pressure optional) |
Processing Viscosity: | 70000CP (ultra-high viscosity 130000CP optional) |
Stirrer Power: | 180W |
Stirrer Rotation Speed: | 0~200rpm (ultra-high rotation speed optional) |
Impeller Configuration: | Anchor-type wall-scraping stirring impeller |
Emulsifying Homogenizer Power: | 1500W |
Emulsifying Homogenizer Rotation Speed: | 300~6000rpm |
Emulsifying Working Head Model: | 60DG |
Support Lifting Method: | Electric lifting |
Support Lifting Stroke: | 400mm |
Material Contacting Material: | SUS316L stainless steel, scraper can be PTFE or silicone |
Reactor Body Material: | Borosilicate glass jacketed container (SUS316L stainless steel container also optional) |
Weight: | 100KG |
Packaging: | Wooden case |
| Chemicals/Reaction Equipment/Reactors | |
